A quantitative study on the terrestrial input to the tropical Northeast Atlantic.

Eolian dust and riverine discharge are identified as two key components of terrestrial input to the oceans. They supply micronutrients to the oceans and modify marine carbon biogeochemistry and global climate through dust-land-ocean interactions. However, it is challenging to accurately constrain regional terrestrial inputs in the past, with currently available models and geochemical proxies. The present study utilizes sedimentary wtCaCO3% records to estimate lithogenic fluxes. The depth-dependance of CaCO3 preservation in the Holocene and Last Glacial Maximum (LGM) sediments in two major basins of the tropical Northeast Atlantic Ocean is described using a carbonate dissolution model. Results show that during the LGM, reduced dust deposition and slight drops of fluvial input are found in the Canary Basin and Cape Verde margins, respectively. To supplement, carbonate deposition during the LGM indicates that the deep subtropical Northeast Atlantic is seized by more sluggish deep waters relative to today.

Self-reported exposure to dust and diesel exhaust, respiratory symptoms, and use of respiratory protective equipment among Arctic miners.

Arctic miners face significant risks from diesel exhaust and dust exposure, potentially leading to adverse respiratory health. Employers must limit harmful exposures, using personal protective equipment (PPE) as a last line of defense. This study explored the association between reported respiratory exposure and symptoms, and PPE training and usage. Data from the MineHealth study (2012-2014) included a total of 453 Arctic open pit miners in Norway, Sweden, and Finland. Participants answered questions on exposure to dust and diesel exhaust, respiratory symptoms, and PPE use, in addition to age, gender, BMI, smoking, and self-rated health. Estimated exposure to dust was common, reported by 91%, 80%, and 82% and that of diesel exhaust by 84%, 43%, and 47% of workers in Sweden, Finland, and Norway, respectively. Reported dust exposure was significantly related to respiratory symptoms (OR 2.2, 95% CI 1.3-3.7), diesel exposure increased the occurrence of wheezing (OR 2.6, 95% CI 1.3-5.4). PPE use varied between the studied mines. Non-use was common and related to reduced visibility, wetness, skin irritation and fogging of the respiratory PPE. Future research should employ more precise exposure assessment, respiratory function as well as explore the reasons behind the non-compliance of PPE use.

The incidence of upper respiratory infections in children is related to the concentration of vanadium in indoor dust aggregates.

Background: It has been reported that the disease-initiated and disease-mediated effects of aerosol pollutants can be related to concentration, site of deposition, duration of exposure, as well as the specific chemical composition of pollutants. Objectives: To investigate the microelemental composition of dust aggregates in primary schools of Vilnius and determine trace elements related to acute upper respiratory infections among 6-to 11-year-old children. Methods: Microelemental analysis of aerosol pollution was performed using dust samples collected in the classrooms of 11 primary schools in Vilnius from 2016 to 2020. Sites included areas of its natural accumulation behind the radiator heaters and from the surface of high cupboards. The concentrations of heavy metals (Pb, W, Sb, Sn, Zr, Zn, Cu, Ni, Mn, Cr, V, and As) in dust samples were analyzed using a SPECTRO XEPOS spectrometer. The annual incidence rates of respiratory diseases in children of each school were calculated based on data from medical records. Results: The mean annual incidence of physician-diagnosed acute upper respiratory infections (J00-J06 according to ICD-10A) among younger school-age children was between 25.1 and 71.3% per school. A significant correlation was found between vanadium concentration and the number of episodes of acute upper respiratory infections during each study year from 2016 to 2020. The lowest was r = 0.67 (p = 0.024), and the highest was r = 0.82 (p = 0.002). The concentration of vanadium in the samples of dust aggregates varied from 12.7 to 52.1 parts per million (ppm). No significant correlations between the other trace elements and the incidence of upper respiratory infections were found, which could be caused by a small number of study schools and relatively low concentrations of other heavy metals found in the samples of indoor dust aggregates. Conclusion: A significant and replicable correlation was found between the concentration of vanadium in the samples of natural dust aggregates collected in primary schools and the incidence of acute upper respiratory infections in children. Monitoring the concentration of heavy metals in the indoor environment can be an important instrument for the prevention and control of respiratory morbidity in children.

Research and application of bag filter system for railway ballast bed coal suction vehicles: An optimization and application study.

The current bag filter system used by railway ballast bed coal suction vehicles for cleaning coal dust from railway tunnels has low operational efficiency and generates significant volumes of dust. This paper describes a simulation test unit designed to enhance the dust removal performance in railway tunnels. The flow field inside the simulation test unit is investigated under different operating conditions through numerical simulations, and the variations in air volume and working resistance, total dust collection efficiency, and optimal operating parameters of a pulse cleaning system are identified through a series of experiments. The numerical results show that the pulse cleaning system does not significantly affect the uniformity of the flow field distribution at the bottom of the filter cartridge during the process of operation. The experimental research indicates that the simulation test unit satisfies the design requirements, achieving an average total dust removal efficiency of 99.93%. A field application shows that the total dust mass concentration at the operator position can be reduced from 335.8 mg∙m-3 to 4.2 mg∙m-3, effectively improving the operating environment within the tunnel.

Abundance and sources of particulate polycyclic aromatic hydrocarbons and aromatic acids at an urban site in central China.

We conducted a simultaneous field study of PM2.5-bound particulate polycyclic aromatic hydrocarbons (PAHs) and aromatic acids (AAs) in a polluted city Zhengzhou to explore the concentration, sources and potential conversion pathways between PAHs and AAs in different seasons. The average concentrations of PM2.5, 28PAHs and 8AAs during the sampling period were 77 µg/m3, 75 ng/m3, and 283 ng/m3, respectively. The concentration of both 28PAHs and 8AAs were highest in winter and lowest in summer with ratios of 6.3 and 2.3, respectively. PAHs with 5-7 rings were the main components of PAHs (52%), followed by 4 rings PAHs (30%) and 2-3 rings PAHs (18%). According to the source appointment results obtained by positive matrix factorization, the main sources of PAHs were combustion and vehicle emissions, which account for 37% and 34%, respectively. 8AAs were divided into three groups, including four benzene dicarboxylic acids (B2CAs), three benzene tricarboxylic acids (B3CAs) and one benzene tetracarboxylic acid (B4CA). And interspecies correlation analysis with PM2.5 source markers were used to investigate potential sources. Phthalic acid (o-Ph) was the most abundant specie of 8AAs (157 ng/m3, 55% of 8AAs), which was well correlated with sulfate. Meanwhile, B3CAs and B4CA were highly correlated with sulfate and weakly correlated with levoglucosan, suggesting that secondary formation was their main source. As logical oxidation products of PAHs, o-Ph and B3CAs showed good correlations with a number of PAHs, indicating possible photochemical oxidation pathway by PAHs. In addition, O3, NO2, temperature and relative humidity have positive effects on the secondary formation of B3CAs.

Health risks and sources of trace elements and black carbon in PM2.5 from 2019 to 2021 in Beijing.

A comprehensive health risk assessment of PM2.5 is meaningful to understand the current status and directions regarding further improving air quality from the perspective of human health. In this study, we evaluated the health risks of PM2.5 as well as highly toxic inorganic components, including heavy metals (HMs) and black carbon (BC) based on long-term observations in Beijing from 2019 to 2021. Our results showed that the relative risks of chronic obstructive pulmonary disease, lung cancer, acute lower respiratory tract infection, ischemic heart disease, and stroke decreased by 4.07%-9.30% in 2020 and 2.12%-6.70% in 2021 compared with 2019. However, they were still at high levels ranging from 1.26 to 1.77, in particular, stroke showed the highest value in 2021. Mn had the highest hazard quotient (HQ, from 2.18 to 2.56) for adults from 2019 to 2021, while Ni, Cr, Pb, As, and BC showed high carcinogenic risks (CR > 1.0×10-6) for adults. The HQ values of Mn and As and the CR values of Pb and As showed constant or slight upwards trends during our observations, which is in contrast to the downward trends of other HMs and PM2.5. Mn, Cr, and BC are crucial toxicants in PM2.5. A significant shrink of southern region sourcesof HMs and BCshrank suggests the increased importance of local sources. Industry, dust, and biomass burning are the major contributors to the non-carcinogenic risks, while traffic emissions and industry are the dominant contributors to the carcinogenic risks in Beijing.

Bioaccessibility of halogenated flame retardants and organophosphate esters in settled dust: Influences of specific dust matrices from informal e-waste and end-of-life vehicle processing areas in Vietnam.

Bioaccessibility of halogenated flame retardants (HFRs) and organophosphorus esters (OPEs) is necessarily investigated to provide more accurate risk assessment and information about absorption behavior of these pollutants. In this study, total and bioaccessible concentrations of HFRs (including legacy and alternative substances) and OPEs were determined in settled dust samples collected from Vietnamese e-waste and end-of-life vehicle (ELV) processing areas. Concentrations of both HFRs and OPEs were significantly higher in the e-waste dust than ELV dust. Bioavailability of HFRs and OPEs in dust was determined by using an in vitro assay with human-simulated digestive fluids, dialysis membrane, and Tenax® TA sorptive sink. Bioaccessibility of HFRs was markedly lower than that of OPEs, which could be largely due to higher hydrophobicity of HFRs compared to OPEs. Bioaccessibility of almost hydrophobic compounds were markedly lower in the e-waste dust (containing micronized plastic debris) than in the ELV dust (containing oily materials), suggesting the influence of specific dust matrices on pollutant bioaccessibility. Although the daily uptake doses of selected HFRs and OPEs from dust were markedly higher in the e-waste sites compared to the ELV sites, the direct exposure risk was not significant. Our results suggest that bioaccessibility can partly explain the differences between dust and uptake profiles, which may relate to accumulation profiles of HFRs and OPEs in human samples.

Respirable dust and crystalline silica concentrations among workers at a brick kiln in Bhaktapur, Nepal.

Exposure to respirable dust and crystalline silica (SiO2) has been linked to chronic obstructive pulmonary disease, silicosis, cancer, heart disease, and other respiratory diseases. Relatively few studies have measured respirable dust and SiO2 concentrations among workers at brick kilns in low- and middle-income countries. The purpose of this study was to measure personal breathing zone (PBZ) respirable dust and SiO2 concentrations among workers at one brick kiln in Bhaktapur, Nepal. A cross-sectional study was conducted among 49 workers in five job categories: administration, fire master, green (unfired) brick hand molder, green brick machine molder, and top loader. PBZ air samples were collected from each worker following Methods 0600 (respirable dust) and 7500 (respirable crystalline SiO2: cristobalite, quartz, tridymite) of the U.S. National Institute for Occupational Safety and Health. Eight-hour time-weighted average (TWA) respirable dust and quartz concentrations were also calculated. SiO2 percentage was measured in one bulk sample each of wet clay, the release agent used by green brick hand molders, and top coat soil at the brick kiln. The geometric mean (GM) sample and TWA respirable dust concentrations were 0.20 (95% confidence interval [CI]: 0.16, 0.27) and 0.12 (95% CI: 0.09, 0.16) mg/m3, respectively. GM sample and TWA quartz concentrations were 15.28 (95% CI: 11.11, 21.02) and 8.60 (95% CI: 5.99, 12.34) µg/m3, respectively. Job category was significantly associated with GM sample and TWA respirable dust and quartz concentrations (all p < 0.0001). Top loaders had the highest GM sample and TWA respirable dust concentrations of 1.49 and 0.99 mg/m3, respectively. Top loaders also had the highest GM sample and TWA quartz concentrations of 173.08 and 114.39 µg/m3, respectively. Quartz percentages in bulk samples were 16%-27%. Interventions including using wet methods to reduce dust generation, administrative controls, personal protective equipment, and education and training should be implemented to reduce brick kiln worker exposures to respirable dust and SiO2.

Respirable dust exposure impact on respiratory symptoms among cleaners in a Selangor Public University, Malaysia.

INTRODUCTION: Cleaners perform a vital role in environmental health by keeping the place clean, but they are also exposed to various hazards. Yet, there is a lack of effective and accessible occupational safety standard measures, thus making this to be difficult to monitor the long-term health effects of cleaners. This study aims to determine the respirable dust exposure on respiratory symptoms among cleaners in a public university in Selangor. MATERIALS AND METHODS: A cross-sectional study was carried out among 51 cleaners. The respondents' background information and respiratory symptoms were gathered using a series of standardised questionnaires validated by the American Thoracic Society (ATS-DLD-78-A). The 8- hour respirable dust exposure to cleaners was measured using an air sampling pump (Gillian & Sensodyne Gil Air 3). RESULTS: The mean of respirable dust was lower than permissible exposure limit with 0.63±0.57mg/m3. The respiratory symptoms among the cleaners showed no significant association between cough, phlegm, and breathing difficulties with working tenure. Meanwhile, wheezing and coughing with phlegm have an almost significant association with working tenure among cleaners with (Χ2=1.00, p=0.08) and (Χ2=1.00, p=0.07) respectively. Exposure to respirable dust has exhibited 6 times the prevalence of coughing with phlegm among cleaners (PR=6.28, 95% CI: 0.44, 89.38). CONCLUSION: The findings of this study demonstrated that the cleaners were significantly affected by the respirable dust. The cleaners' working environment has caused them to be exposed to respirable dust.

Identification and quantification of trace metal(loid)s in water-extractable road dust nanoparticles using SP-ICP-MS.

Resuspension of road dust is a major source of airborne particulate matter (PM) in urban environments. Inhalation of ultrafine particles (UFP; < 0.1 µm) represents a health concern due to their ability to reach the alveoli and be translocated into the blood stream. It is therefore important to characterize chemical properties of UFPs associated with vehicle emissions. We investigated the capability of Single-Particle ICP-MS (SP-ICP-MS) to quantify key metal(loid)s in nanoparticles (NPs; < 0.1 µm) isolated from road dust collected in Toronto, Canada. Water extraction was performed to separate the <1-µm fraction from two different road dust samples (local road vs. arterial road) and a multi-element SP-ICP-MS analysis was then conducted on the samples' supernatants. Based on the particle number concentrations obtained for both supernatants, the metal(loid)-containing NPs could be grouped in the following categories: high (Cu and Zn, > 1.3 × 1011 particles/L), medium (V, Cr, Ba, Pb, Sb, Ce, La), low (As, Co, Ni, < 4.6 × 109 particles/L). The limit of detection for particle number concentration was below 5.5 × 106 particles/L for most elements, except for Cu, Co, Ni, Cr, and V (between 0.9 and 7.7 × 107 particles/L). The results demonstrate that road dust contains a wide range of readily mobilizable metal(loid)-bearing NPs and that NP numbers may vary as a function of road type. These findings have important implications for human health risk assessments in urban areas. Further research is needed, however, to comprehensively assess the NP content of road dust as influenced by various factors, including traffic volume and speed, fleet composition, and street sweeping frequency. The described method can quickly characterize multiple isotopes per sample in complex matrices, and offers the advantage of rapid sample scanning for the identification of NPs containing potentially toxic transition metal(loid)s at a low detection limit.

Characterization and childhood exposure assessment of toxic heavy metals in household dust under true living conditions from 10 China cities.

Health hazards caused by metal exposure in household dust are concerning environmental health problems. Exposure to toxic metals in household dust imposes unclear but solid health risks, especially for children. In this multicenter cross-sectional study, a total of 250 household dust samples were collected from ten stratified cities in China (Panjin, Shijiazhuang, Qingdao, Lanzhou, Luoyang, Ningbo, Xi'an, Wuxi, Mianyang, Shenzhen) between April 2018 and March 2019. Questionnaire was conducted to gather information on individuals' living environment and health status in real-life situations. Multivariate logistic regression and principal component analysis were conducted to identify risk factors and determine the sources of metals in household dust. The median concentration of five metals in household dust from 10 cities ranged from 0.03 to 73.18 µg/g. Among the five heavy metals, only chromium in household dust of Mianyang was observed significantly both higher in the cold season and from the downwind households. Mercury, cadmium, and chromium were higher in the third-tier cities, with levels of 0.08, 0.30 and 97.28 µg/g, respectively. There were two sources with a contribution rate of 38.3 % and 25.8 %, respectively. Potential risk factors for increased metal concentration include long residence time, close to the motorway, decoration within five years, and purchase of new furniture within one year. Under both moderate and high exposure scenarios, chromium showed the highest level of exposure with 6.77 × 10-4 and 2.28 × 10-3 mg·kg-1·d-1, and arsenic imposed the highest lifetime carcinogenic risk at 1.67 × 10-4 and 3.17 × 10-4, respectively. The finding highlighted the priority to minimize childhood exposure of arsenic from household dust.

Desert dust episodes during pregnancy are associated with increased preterm delivery in French Guiana.

Preterm deliveries are a major multifactorial public health problem in French Guiana. Desert dust episodes have been associated with preterm delivery in Guadeloupe, a territory with similarities to French Guiana. We thus tried to replicate this finding in the context of French Guiana. A retrospective ecological cohort study combined daily PM10 concentration measurements during pregnancy and term at delivery extracted from French Guiana's computerized pregnancy delivery registry. Daily PM10 concentrations during the course of pregnancy were analyzed as mean concentrations and as the proportion of intense dust episodes (≥55 µg PM10/m3). These exposure variables were studied in relation to the outcome of preterm delivery. Overall, 3,321 pregnant women with complete daily PM10 measurements were included, of whom 374 (11.26%) delivered prematurely. Among preterm deliveries, 168 (44.9%) were spontaneous deliveries and 206 (55.1%) were induced. Rank-sum tests showed that, for spontaneous and induced spontaneous deliveries, both mean PM10 concentrations and proportions of intense desert dust episodes were significantly greater among preterm births than among term births. Although the proportion of intense desert dust episodes during pregnancy was significantly associated with spontaneous preterm deliveries, the relation was U-shaped, with an adjusted odds ratio (AOR) = 2 (95%CI = 1.2-3.1) for lowest values relative to median values and AOR = 5.4 (95%CI = 3.2-8.9) for the highest values relative to median values. Similarly, the proportion of intense desert dust episodes during pregnancy was also significantly associated with induced preterm deliveries in a U-shaped manner (AOR = 2.7 (95%CI = 1.6-4.5) for the lowest relative to median values and AOR = 6.8 (95%CI = 3.9-11.9) for the highest relative to median values). Although in our study the relation between PM10 concentrations appeared non-linear, the highest mean concentrations and intense desert dust episodes were indeed associated with both spontaneous and induced preterm delivery.

[Characterization of Metal Elements in Atmospheric PM2.5 and Health Risk Assessment in Heze in Winter from 2017 to 2018].

Atmospheric PM2.5 samples were collected in Heze, Shandong Province, from a total of three sampling sites at Heze College, Huarun Pharmacy, and a wastewater treatment plant between October 15, 2017 and January 31, 2018, to determine the concentrations of 21 metal elements in PM2.5 using inductively coupled plasma mass spectrometry (ICP-MS). The degree of elemental enrichment was also discussed, the health risks and potential heavy metal ecological risks were assessed. The results showed that ρ (PM2.5) ranged from 26.7 to 284.1 µg·m-3 at the three sampling sites during the sampling period, and the concentration values did not differ significantly, all of which were at high pollution levels. The highest concentrations of K were found in the three sampling sites, accounting for 31.03%, 39.47%, and 38.43% of the total, respectively, mainly due to the high contribution of biomass burning in autumn and winter in Heze, a large agricultural city. The highest concentrations of Zn, 89.70, 84.21, and 67.68 ng·m-3, were found in the trace elements at the three sampling sites, respectively. The enrichment factor results showed that the enrichment factor values of Zn, Pb, Sn, Sb, Cd, and Se were higher than 100, among which the enrichment factors of Cd and Se were higher than 2 000 and 4 000, respectively, which were significantly influenced by anthropogenic activities and might have been related to industrial production, metal smelting, road sources, and coal combustion emissions. The health risk results showed that there was some potential non-carcinogenic risk (HQ>0.1 for children and adults) for As and a combined potential non-carcinogenic risk (HI>0.1) and some potential carcinogenic risk (CRT>1×10-6) for both children and adults at the three sampling sites. There was a more significant carcinogenic risk (CRT>1×10-4) for adults at the wastewater treatment plant, and the slightly higher carcinogenic risk for adults than that for children may have been related to the longer outdoor activity and higher PM2.5 exposure for adults. The elements with the highest potential ecological risk values were Cd, As, and Pb, with Cd exhibiting a very high potential ecological risk that should be taken seriously. All three sampling sites showed a very high combined potential ecological risk, with the intensity spatially expressed as Heze College>Huarun Pharmacy>wastewater treatment plant.

A nation-wide study for the occurrence of PPD antioxidants and 6PPD-quinone in road dusts of China.

N,N'-substituted p-phenylenediamines (PPDs) are widely used antioxidants in rubber tires, which could be released and accumulated in road dusts with rubber tires wear. As ozonation product of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), 6PPD-quinone (6PPD-Q) exhibited higher toxicity to coho salmon. However, studies on their environmental behaviors are still limited. Road dust is the major medium PPDs exist, which significantly affects the levels of PPDs in other mediums, especially surface water and particulate matter. In this study, road dust samples were collected in 55 major cities of China to explore the distribution characteristics of PPDs and 6PPD-Q. The concentrations of total PPDs (ΣPPDs) and 6PPD-Q in urban trunk road dust samples were in the ranges of 7.90-727 and 3.00-349 ng/g, with median concentrations of 68 and 49 ng/g, respectively. 6PPD and 6PPD-Q are the dominant components in most road dusts. The functional region-dependent pollution characteristics of PPDs and 6PPD-Q give the first finding that urban tunnel road was the highly polluted region, followed by urban trunk roads. Suburban road dusts had a lower pollution level. Moreover, the estimated daily intake (EDI) of PPDs and 6PPD-Q for children was much higher than adults.

Comprehensive Identification and Ubiquitous Occurrence of Eight Classes of Rubber-Derived Vulcanization Accelerators in Urban Dusts.

Vulcanization accelerators (VAs) serve as crucial additives in synthetic rubber on a global scale. Despite their widespread use, the environmental presence, distribution, and associated exposure risks of VAs remain poorly understood. This study compiled a target list and conducted a screening for eight classes encompassing 42 VAs in diverse urban dust samples from South China. A total of 40 of the 42 target VAs were detectable across all four studied regions, among which 30 were identified for the first time in the environment. Among the eight structure-classified VA classes, xanthates exhibited the highest concentrations (median: 3810-81,300 ng/g), followed by thiazoles, guanidines, sulfenamides, dithiocarbamates, thiurams, thioureas, and others. The median total concentrations of all target VAs (∑VAs) were determined to be 5060 ng/g in road dust, 5730 ng/g in parking lot dust, 29,200 ng/g in vehicle repair plant dust, and 84,300 ng/g in household dust, indicating the widespread presence of numerous rubber-derived VAs in various urban environments. This study marked the first systematic effort to identify a wide range of emerging rubber-derived VAs prevalent in urban environments. The findings call for increased attention to these widely utilized but less well-evaluated chemicals in future research and environmental management efforts.

Combined use of principal component analysis/multiple linear regression analysis and artificial neural network to assess the impact of meteorological parameters on fluctuation of selected PM2.5-bound elements.

Based on the data of the State of Global Air (2020), air quality deterioration in Thailand has caused ~32,000 premature deaths, while the World Health Organization evaluated that air pollutants can decrease the life expectancy in the country by two years. PM2.5 was collected at three air quality observatory sites in Chiang-Mai, Bangkok, and Phuket, Thailand, from July 2020 to June 2021. The concentrations of 25 elements (Na, Mg, Al, Si, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Sr, Ba, and Pb) were quantitatively characterised using energy-dispersive X-ray fluorescence spectrometry. Potential adverse health impacts of some element exposures from inhaling PM2.5 were estimated by employing the hazard quotient and excess lifetime cancer risk. Higher cancer risks were detected in PM2.5 samples collected at the sampling site in Bangkok, indicating that vehicle exhaust adversely impacts human health. Principal component analysis suggests that traffic emissions, crustal inputs coupled with maritime aerosols, and construction dust were the three main potential sources of PM2.5. Artificial neural networks underlined agricultural waste burning and relative humidity as two major factors controlling the air quality of Thailand.

Pet collars containing tetrachlorvinphos (TCVP): evaluation of the results of torsion and on-animal release studies and implications for post-application consumer exposure and risk analysis.

Tetrachlorvinphos (TCVP) is the pesticidal active ingredient found in some flea and tick collars for dogs and cats. Recent studies sponsored by The Hartz Mountain Corporation, confirm the safety of TCVP as an active ingredient in pet collars. Based upon data from these new studies and results previously relied upon by the U.S. Environmental Protection Agency, the following conclusions have been made: Torsion study data clearly indicate that approximately 93% of released formulation from TCVP containing pet collars is in a liquid phase immediately following activation.Further, even more relevant to human health risk analysis associated with post-application exposures, in vivo data from dogs wearing TCVP pet collars definitively document that TCVP dust released from the collar is rapidly absorbed into the sebum. The maximum ratio of dust to liquid was 0.023% dust to 99.977% liquid.In vivo fur data provide scientific evidence confirming that the mechanism of dissemination of TCVP from pet collars is as a liquid suspended or dissolved in the animal's sebum, even though it may be released from the collar as a solid. Thus, potential post-application exposure to TCVP, including immediately following collar placement, is almost entirely to a liquid phase.Based upon EPA's refined and conservative "untrimmed" collar risk assessment, post-application incidental oral hand-to-mouth activity by children aged 1 to <2 years of age results in margins of exposure significantly greater than the level of concern of 1000, and therefore do not present unreasonable health risk.

[Exploration of detection methods for free silica with different crystal forms in dust].

Objective: To investigate the differences and applicability of free silica detection methods of different crystal forms in dust, and to provide a basis for the selection of various methods. Methods: From December 2021 to June 2022, dust samples from 20 enterprises in different industries in 18 cities in Henan Province were randomly selected as the investigation objects. X-ray diffraction (XRD) method was used to analyze the samples and classify the samples. Based on GBZ/T 192.4-2007 "Determination of Dust in the Air of Workplace-Part 4: Content of Free Silica in Dust", pyrophosphate method and infrared spectrophotometry were used for quantitative determination. The measured results were analyzed by paired sample t test to evaluate the advantages and disadvantages of the two methods and their applicable scope. Results: The XRD results of 20 dust samples could be divided into α, ß, γ crystal types and the mixed type of α and γ. There was no significant difference between pyrophosphate method and infrared spectrophotometry (P=0.180). The pyrophosphate method results of ß, γ and α, γ mixed crystalline free silica were significantly higher than those of infrared spectrophotometry, and the difference was statistically significant (P<0.001) . Conclusion: Pyrophosphate method and infrared spectrophotometry are suitable for α-type free silica, while pyrophosphate method is suitable for ß, γ and α, γ mixed crystalline free silica.

Spatiotemporal variation of 6PPD and 6PPDQ in dust and soil from e-waste recycling areas.

N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) and its derivative 6PPDQ have been detected in various environmental media, with harmful consequences for both ecosystems and biological health. However, the distribution of 6PPD and 6PPDQ in areas around e-waste recycling areas is currently unknown. We collected soil and dust samples from areas around a traditional e-waste recycling zone, an emerging recycling park, and a reference area. Higher levels of 6PPD were found in dust from residential areas around the traditional e-waste recycling zone compared to the reference area (median: 108.99 versus 33.57 ng/g, P < 0.01). Lower levels of 6PPDQ were detected in dust samples from around the emerging e-waste recycling parks compared to traditional e-waste recycling zones (median: 15.40 versus 46.37 ng/g, P < 0.05). The median concentrations of 6PPD and 6PPDQ were higher in the dust samples than in the soil samples (P < 0.001). The concentrations of 6PPD and 6PPDQ in the dust and soil varied seasonally, with the highest total concentrations occurring in the winter. Results from a multiple linear regression analysis indicate that 6PPDQ is negatively correlated with temperature and positively correlated with 6PPD, O3, and radiation. This study confirms that e-waste is a potential contributor to 6PPD and 6PPDQ. In residential areas, 6PPD and 6PPDQ are more likely to accumulate in dust than in soil. The emerging e-waste recycling parks have greatly improved the local 6PPDQ pollution situation. Further studies are necessary to understand the distribution of newly found substances in various settings.

Phenylmethylsiloxanes in indoor dust from residential area of China: Source, occurrence, bioavailability and exposure assessment.

Phenylmethylsiloxanes, as modified products of dimethylsiloxanes, have been used in personal care products (PCPs) and household appliances, with indoor dust serving as one potential reservoir due to their particle-binding properties. This study measured six isomers of two phenylmethylsiloxanes (P3 and P4) in PCPs (99 %) intakes of phenylmethylsiloxanes for adults, while dust ingestion/adsorption (0.19 ng/d) may play important roles for toddlers/infants with little usage of phenylmethylsiloxanes-containing PCPs. Additionally, total daily intakes of PhMeSi(OH)2 (0.30-0.84 ng/d) via ingestion and dermal absorption of dust were higher than P3 (0.06-0.31 ng/d) and P4 (0.02-0.09 ng/d), suggesting exposure risk of degradation product of phenylmethylsiloxanes deserving attention.